Review

Keychron Q1 vs Keychron V1: sound test side by side

The Keychron Q1 and the Keychron V1 are two 75% boards with a knob, one in aluminum and one in plastic; hear both in their sound packs before you choose.

5 min readBy Mechvibes

Keychron Q1 vs Keychron V1: sound test side by side

The Keychron Q1 and the Keychron V1 share a layout: both are 75% boards with a knob, hot-swap sockets, a steel plate and screw-in stabilizers. What sets them apart is the case. The Q1 is machined from aluminum and gasket mounted; the V1 is ABS plastic and tray mounted, at about half the weight. People search "keychron q1 vs v1" word for word, usually to find out whether the metal case is worth hearing before paying for it.

Both boards are in the Mechvibes library as community sound packs, so you can hear them before you buy. We have not used these keyboards ourselves; the facts below come from their makers' pages, linked.

Some links below are affiliate links: Mechvibes may earn a commission on qualifying purchases, at no cost to you. As an Amazon Associate, Mechvibes earns from qualifying purchases.

Keychron Q1

Keychron Q1

Played 90 times on Mechvibes in the last 30 days across 2 community packs, and counting.

Keychron V1

Keychron V1

Played 25 times on Mechvibes in the last 30 days across 2 community packs, and counting.

Affiliate links. Prices and availability are on Amazon.

At a glance

Keychron Q1Keychron V1
Layout75%, with a knob75%, with a knob
CaseCNC machined aluminum, gasket mount, steel plateABS plastic, tray mount, steel plate
SwitchesGateron G Pro, Gateron Phantom or Keychron K Pro, hot-swapKeychron K Pro, hot-swap
ConnectivityUSB-C, wiredUSB-C, wired
Sound in its packsNot statedThocky
Packs on Mechvibes22
Pack views in the 30 days to November 17, 20269025

Pack views count each person once a day. Q1 facts from Keychron's page for the Q1 Version 2; V1 facts from Keychron's V1 page. The Q1's packs do not describe their sound in words, so that cell is left blank.

How they sound

The Q1 has two packs, and neither records the Gateron G Pro switch Keychron lists first. Modded Keychron Q1 with Gateron Phantom red switches, the one people opened most, records Gateron Phantom Red switches. Keychron lists Gateron Phantom as one of the Q1's switches, and says that version comes with double-shot ABS keycaps and an aluminum plate. The pack's name says the board was modded, but its description does not say what was changed. ricecloud makes the best records Gateron Black Ink V2 switches.

The V1 also has two packs, and neither records the Keychron K Pro switches it ships with. Keychron V1 with Lubed Gateron Milky yellow switches records lubed Gateron Milky Yellow linear switches. Keychron V1 w/Lubed Crystal Panda Switches records lubed Crystal Panda tactile switches, and its maker describes it as thocky and says it sounds best with the volume between 65% and 85%.

A simple way to compare: open one pack of each and type the same sentence on both, at the same volume. All four packs use different switches, so part of what you hear is the switch, not only the case.

What sets them apart

  • The case. The Q1 has a full CNC machined aluminum body with a gasket mount (Keychron). The V1 has an ABS plastic body with a tray mount (Keychron).
  • The weight. Keychron lists the fully assembled Q1 at 1,825 g (Keychron) and the fully assembled V1 at 970 g (Keychron).
  • The height. The Q1 is 22.6 mm tall at the front without keycaps, at a 5.2° angle (Keychron). The V1 is 17.9 mm at the front, and Keychron lists three angles for it: 3.5°, 7.08° and 9.52° (Keychron).
  • What dampens the sound. Keychron says the Q1 has a double gasket design, with silicone pads between the top and bottom cases to reduce resonance between the metal parts (Keychron). For the V1, it names an acoustic silicone pad (Keychron).
  • Switch choices. Keychron lists the fully assembled Q1 with Gateron G Pro, Gateron Phantom or Keychron K Pro switches (Keychron), and the V1 with Keychron K Pro Red, Blue, Brown or Banana (Keychron).

Both standard versions come with double-shot PBT keycaps in Keychron's OSA profile, run QMK firmware and are wired over USB-C at a 1000 Hz polling rate. Both pages point to newer versions: the Q1 HE 8K and Q1 Ultra 8K, and the V1 8K and V1 Ultra 8K.

Which one to hear first

If you want to hear a deeper sound, start with the V1: its Crystal Panda pack is the only one of the four whose maker calls it thocky.

If you want to hear what a metal, gasket-mounted case does, start with the Q1: its Phantom Red pack is the one people opened most of the four.

If you would rather hear one switch in both cases, there is no such pair yet: none of the four packs shares a switch with another.

How to listen

Every pack page has a keyboard you can type on. Turn the volume up and type anywhere on the page to hear the pack. To hear it while you work in other apps, download Mechvibes, open the pack and press Install.

The same keyboard can sound very different from one recording to the next. Switches, keycaps, the desk and the microphone all change the sound, which is why some keyboards here have several packs. If you own one of these boards in a setup that is missing here, such as either board with its stock switches, you can record your own pack and add it to the library.

Community

Swap setups, find your next favourite pack and meet people who care how typing sounds as much as you do.

DiscordShare your setup15k+ members. Share packs and setups, ask questions, and help each other.Join the Discord
SourceForgeGet Mechvibes 3The new version is up on SourceForge. Download it there or leave a review.Open SourceForge
AlternativeToRecommend itTell others what you think, and help people looking for a keyboard sound app find it.Open AlternativeTo