
Keycap plastic changes the pitch of every key you press, and a new set of keycaps is the easiest upgrade you can make: no soldering, no opening the case. Most keycaps are made of one of two plastics, ABS or PBT. Before you buy a set, you can hear keyboards recorded with each kind. The packs below say which keycaps were on the board, so you can hear the difference first.
The packs come from the Mechvibes library, and their views count how often people opened them in the 30 days to November 17, 2026, each person once a day. We have not swapped these keycaps ourselves. What each plastic does comes from the source linked, and the keycaps on each board come from the pack's own name or its maker's words.
Some links below are affiliate links: Mechvibes may earn a commission on qualifying purchases, at no cost to you. As an Amazon Associate, Mechvibes earns from qualifying purchases.
PBT and ABS keycaps
KeebsForAll describes PBT keycaps as thicker and heavier, with a crisp, lower-pitched sound, and ABS keycaps as louder and more hollow. It says PBT has a textured, matte surface and does not develop a greasy shine, while ABS has a smooth, glossy finish that becomes shiny over time from finger oils. To swap them, it says to check that your switches use MX-style stems, use the right puller, and choose a set that matches your layout (KeebsForAll).
Four packs that come with Mechvibes record the same Cherry MX switch twice, once with ABS keycaps and once with PBT keycaps, as their names say. The packs do not say whether the rest of the board was the same, so treat each pair as two recordings, not a lab test. Type the same sentence on both sides:
The Cherry MX Red ABS pack is the most played of these, with 88 views, ahead of the Cherry MX Blue PBT pack with 66.
These packs say they were recorded with PBT keycaps:
- [NOVIX#57] ROG HFX Magnetic Switches: an ASUS ROG Falchion Ace HFX with ROG HFX magnetic switches. Its maker lists the keycap type as PBT and the board as stock, and the pack is described as clacky.
- [NOVIX#56] Gateron Magnetic Jade Pro HE: a Cidoo C75 with Gateron Magnetic Jade Pro switches. Its maker lists the keycap type as PBT, and the pack is described as clacky and thocky.
- Steelseries Apex PRO Sakura PBT Keycaps: a SteelSeries Apex Pro with OmniPoint switches and a Sakura PBT set, as its name says. The Apex Pro has 11 other packs, such as Steelseries Apex Pro V2 by Akira, but their makers do not say which keycaps they used.
- Tealios V2 on PBT by Akira: a custom board with Zeal Tealios V2 linear switches and PBT keycaps.
- CherryMX RED SILENT BY NOT AGAIN: Cherry MX Silent Red switches with PBT keycaps. Its maker says it is silent.
- Topre Purple Hybrid - PBT keycaps: Topre Purple Hybrid switches with PBT keycaps, one of the packs that come with Mechvibes.
One more community pack says it was recorded with ABS keycaps: Aukey Browns, an Aukey board with Outemu Brown switches. Its maker lists double-shot ABS keycaps, but also spray-lubed switches and a tape and polyfill mod in the case, so the keycaps are not the only change.
What you need
PBT keycaps
KeebsForAll says PBT gives a crisper, lower-pitched sound than ABS and does not turn shiny.
- Good for: your keycaps have gone shiny or you want a lower pitch
- Skip it if: your switches do not use MX-style stems
Keycap and switch puller
KeebsForAll says to use the right puller to take the old keycaps off.
- Good for: you are swapping a full set of keycaps
- Skip it if: you already have a keycap puller
How to listen
Every pack page has a keyboard you can type on. Turn the volume up and type anywhere on the page to hear the pack. To hear it while you work in other apps, download Mechvibes, open the pack and press Install.
The same keyboard can sound very different from one recording to the next. Switches, keycaps, the desk and the microphone all change the sound, so treat each pack as one person's board, not a measurement. If you have swapped the keycaps on your own board, you can record your own pack and add it to the library, before and after.